Locked Keys in Car? Here's How to Open Your Car Without Damage
If you've locked your keys inside your car, don't be afraid. There are numerous techniques you can try prior to calling a locksmith or roadside assistance service.
For example, you can make use of a shoelace that has an a slip knot to pull up a post lock or a wire coat hanger that you twist and then mold into hook. You can also use a door wedge or an inflatable wedge.
Pump Wedge
If you've been stuck in a locked car and none of the DIY methods such as wire hangers, shoestrings or wedges work for you then it's time to call in an expert. A locksmith or repo service provider might have lockout tools that can allow you to unlock your car without damaging it.
If they do, be sure you are using them correctly. Know where to place the wedge tool. Many people put the wedge tool in the top corner of a door which is the most vulnerable. This is a bad move, as you may damage the weather stripping and wires within the doors. Place the wedge in the area where you can see the largest gap and where the maximum leverage is.
The Pump Wedge is an inflatable wedge made from high-quality vinyl that doesn't mar the surface. It is able to slide between the door of your vehicle and the door frame and is pumped up to create a space which allows you to slide in other tools, such as an extended reach car opening tool rod. It has a hook on the other end that you can make into a shape to hold the latch on the door handle.
A less costly version of this is a pair of wooden door stops. You can use them to open the gap between the back of the door. www.g28carkeys.co.uk could also try using a slim jim that is a thin metal strip that can be bent into a hook that can be used to latch to the lock and then pull it up. This method requires practice, however, since you should be cautious not to damage the weather stripping on the door.
Another option is to use a shoelace, however, this is only applicable to older cars without a push-button unlocking mechanism. You can tie a knot in the middle and then move the lace along the door seam until you spot the latch. Then move the lace up and down until it catches onto the lock. Secure the slip knot and then pull it upwards. This method is more difficult than other methods, and it may scratch the paint or damage the door trim if you aren't vigilant.
Inflatable Wedge
You can easily unlock your car using an inflatable wedge-shaped door opener. This will spare you from using prying tools or slim jims. These wedges can be placed between the frame and the window of the car. They, when inflated, create a large space to place a tool with a lengthy reach, such as a button grabber or slim jim. This method is much safer than using a screwdriver and is a viable option even when you don't have access a screwdriver.
Another option to unlock a car without damaging the exterior or interior is to use a wire coat hanger which has been cut into a hook. This can be used to grab the lock and may be more effective than a flat screwdriver because it is less likely to cause damage to the paint on the car. However, you must inspect all the doors to ensure there isn't another way to gain entry.
You can also use a plastic bag twisted into a noose, or v-shaped shape. Be careful not to tear the bag as it could make things worse. This technique is especially helpful when you are unable to locate the lock button. This method isn't as efficient as a wedge or metal coat hanger, but it could assist you in an emergency.
Keep safe and remain calm. There are a variety of options to deal with this issue. If you have read this article, you'll be prepared for any situation that may occur. You can unlock your vehicle by following our steps. This will prevent any unnecessary damage and stress. Of course, if you're able to, make sure to take your keys when you leave your vehicle.
Shoelace
It's one of the "oh crap!" moments that can ruin a day. In the event of an emergency, it's a good idea to keep a few things at hand to aid in unlocking your car without damaging the windows. Certain of these items are readily available and can help you save money on locksmiths, or the time required to call roadside assistance.
A twine or shoelace can be used to unlock a vehicle. It's simple to use and works on a wide range of vehicles. The key to this method is a car with post locks. They can be placed vertically on the sill of the window and easily accessible from outside the car. Use a shoelace as well as a slip knot to accomplish the task. Then, you can slide the shoelace into the gap between door and window frame. Once the slip knot is positioned and secured, pull both ends the string upwards to loosen the lock.
This method is more efficient when applied to older vehicles, and might not work with newer models with a hooked interior lock. If you have a screwdriver in your possession you can use it to open the door more aggressively. You can also use a rod that you can grab from a nearby object like the door frame, or a piece of wood, to attach to the window frame. This will create space for an object to push the lock's interior button.
Although the methods above might be somewhat safe for some drivers, it's best to call for help if you can. This can help avoid further damage to the vehicle and reduce the chance of an accident due to stress. If you don't own a mobile phone or are unable to call for help It is important to let trusted family members and family members know where your car is at all times. A spare set of keys must be kept in a safe place on your vehicle.
Wire Hanger
There is no doubt that locking your keys in your car could be a traumatic experience. However, the key is to remain calm and think through what options you have for retrieving them. You will avoid making the situation worse if you do not be in a panic.
One of the best options is to use a modified wire coat hanger to get back in your vehicle. You'll need to uncoil the coat hanger until it has a straight edge and a hook that you can use to move the lock rod within your door. When you are able to reach the rod, you will be able to pull it up to open the door.
You could also use a rod, or even metal pieces from your vehicle. It is important that you make sure you do not cause any damage to the vehicle in the process and it is ideal to do it without having to take the car apart. This method will work better on older vehicles than modern ones. However it is possible to use it on cars with distinctive door handles on the outside.
You can make use of a shoestring and a slip knot to accomplish the same thing. This is a good idea for the postlock, but it is more difficult to maneuver since you'll be relying on the tension of the string to grab it. The best way to do this is by threading the shoestring through a small hole you can make within the weatherstripping of your vehicle's door. After the shoestring has passed through the weatherstripping, you are able to pull the string tightly to create an elongated loop that will snap around the lock. If you're lucky, the lock will be in the right place.